Refined petroleum products such as gasoline, fuel oils, motor oils, diesel fuel, kerosene, ethylene glycol, and propylene glycol at rated capacity.

• Meter Models: M-5®, M-7®, M10®, M-15®, M-25®, M-30®, M-40®, M-60®, MSAA-30™, MSAA-40™, MSAA-75™, MSAA-120™
• Meter Construction: M-Series: Aluminum; MSAA-Series: Steel case with aluminum element
• Seals: Buna/Viton® as noted by catalog number
• Maximum Pressure: 150psi (as listed by catalog number)
• Temperature: -40° to 185° F
• Bearing Material:  Ni-Resist (carbon bearings are standard on some meter sizes of this class, please consult factory)

Aviation Fuels including Jet-A, Jet-A1, JP-8, Avgas fuels

• Meter Models: M-5®, M-7®, M10®, M-15®, M-25®, M-30®, M-40®, M-40®AVI, M-60®, M-80®, MSAA-30™, MSAA-40™, MSAA-75™, MSAA-120™
• Meter Construction: M-Series: Aluminum; MSAA-Series: Steel case with aluminum element
• Seals: Buna
• Maximum Pressure: 150/275/285 psi (*as listed by catalog number)
• Temperature: -40° to 185° F
• Bearing Material:  Ni-Resist  (carbon bearings are standard on some meter sizes of this class, please consult factory)

Liquid Sweeteners and Syrups such as Dextrose, Fructose, Sucrose, Maltose, Lactose.   Also Corn Oil, Soy Bean, Cotton Seed and Coconut Oils, Shortenings

• Meter Models: M-7®, M-15®
• Meter Construction: Aluminum
• Seals: Buna
• Maximum Pressure: 150psi
• Temperature: -40° to 185° F
• Bearing Material:  Ni-Resist

Treated waters such as potted, deionized, and demineralized water, windshield washer fluid and solvents where no red metals are allowed

• Meter Models: M-5®, M-7®
• Meter Construction: Aluminum
• Seals: Buna
• Maximum Pressure: 150psi
• Temperature: -40° to 185° F
• Bearing Material:  Carbon

Acidic pH Liquids including nitric, phosphoric and glacial acetic acids, fruit juices, vinegar, distilled water

• Meter Models: M-7®
• Meter Construction: Stainless Steel
• Seals: Viton, PTFE
• Maximum Pressure: 150 psi
• Temperature: -40° to 185° F
• Bearing Material:  Carbon  (PTFE bearings optional on some meter sizes, please consult factory)

Liquified Petroleum Gas [LPG] including propane, butane, isobutane, pentane, ethane, and refrigerants.

• Meter Models: MA-4®, MA-5®, MA-7®, MA-15®, MSA-30, MSA-75
• Meter Construction:  MA-Series: Aluminum; MSA-Series: Aluminum with Steel Case
• Seals: Buna
• Maximum Pressure: 350 psi
• Temperature: -40° to 185° F
• Bearing Material:  Carbon

Anhydrous Ammonia (NH3)

• Meter Models: MA-7®, MA-15®
• Meter Construction: Aluminum
• Seals: Buna/EPDM
• Maximum Pressure: 350 psi
• Temperature: -40° to 185° F
• Bearing Material:  Carbon

High Viscosity Liquids such as crude oil, LACT, NOD, heated and/or viscous liquids including: animal fats, resins, #6 oil, non-abrasive asphalt emulsions.

• Meter Models: M-7®, M-30®, MSAA-75™
• Meter Construction: M-Series: Aluminum; MSAA-Series: Steel Case, aluminum element
• Seals: Viton®
• Maximum Pressure: 150-285 psi (refer to catalog for specific pressure by model)
• Temperature: -40° to 185° F
• Bearing Material:  Ni-Resist

General Solvents, methanol, xylene, naptha, acetone, MEK, MIBK, and alcohols (including 200 proof ethanol)

• Meter Models: M-5®, M-7®, M-15®, M-30®, M-60®, MSAA-30™, MSAA-75™
• Meter Construction: M-Series: Aluminum; MSAA-Series: Steel Case, Aluminum Element
• Seals: Buna, Viton® or PTFE as noted by catalog number
• Maximum Pressure: 150-285 psi (as listed by catalog number)
• Temperature: -40° to 185° F
• Bearing Material:  Carbon

Diesel Exhaust Fluid (DEF): Diesel Exhaust Fluid, is composed of deionized water & urea. The urea in DEF solution is used by the
engine’s SCR system to convert smog producing chemicals into simple nitrogen and water.

• Meter Model: M-7®
• Meter Construction: Stainless Steel / Advanced Polymer
• Seals: EPDM
• Approved for flow rates of 5 to 100 gpm (20:1 range)
• Maximum Pressure: 150 psi (Low Pressure drop)
• Temperature: 32 to 100° F