• Sustained Accuracy — no metal-to-metal contact inside the measuring chamber means minimal deterioration in accuracy over time, fewer recalibrations, and longer service life.
• Meters conform to NIST and International Weights and Measures accuracy requirements.
• Wide Temperature Range — products can be metered accurately from -40° F (-40° C) to 160° F (71°C).
• Wide Viscosity Range — LC meters can accurately meter products from less than 30 SSU (less than 1 centipoise) to 1,500,000 SSU (325,000 centipoise).
• Maximum Adaptability — right angle design with choice of stock or custom elbows/ fittings provides unequaled mounting flexibility to meet your installation requirements.
• High Pressure rating — Rated to 350psi / 24 BAR.

• Seals: Buna
• End Fittings: NPT, BSPT, WELD “MA-Series”, 300lb ANSI “MSA-Series”
• Registration (Electronic, Pulse Output or Mechanical)
• Temperature Compensation (TVC)
• Strainers
• Vapor Eliminators
• Printers
• Valves
• Pulsers

• Repeatability:  Capable of 0.02% or better at any flow rate over entire range
• Linearity:
• • Over 5:1 range
    Mech. registration: capable of ±0.125% or better from max. nom. flow rate
    Elect. registration: capable of ±0.10% or better from max. nom. flow rate
  • Over 10:1 range
    Mech. registration: capable of ±0.22% or better from max. nom. flow rate
    Elect. registration: capable of ±0.10% or better from max. nom. flow rate
  • Over 40:1 range
    Mech. registration: capable of ±0.5% or better from max. nom. flow rate
    Elect. registration: capable of ±0.15% or better from max. nom. flow rate
• Temperature range:
  -40º F to 160º F (-40º C to 71º C)

Stated accuracy obtainable when all variables remain constant. Reading/ measurements reflect a minimum of one minute of flow at selected rate(s). All accuracy statements based on metering safety solvent (aliphatic hydrocarbon), approximate viscosity 1 CPS. On higher viscosity products, the average deviation in accuracy will be less.